Options
Stutterecker, Werner
Loading...
Official Name
Stutterecker, Werner
Main Affiliation
Akademische Titel
DI(FH) DI, PhD
Email
werner.stutterecker@fh-burgenland.at
Scopus Author ID
55303713600
Status
staff
Research Outputs
Now showing 1 - 10 of 26
- PublicationDevelopment of a Hardware-in-the-Loop Test Method for Heat Pumps and ChillersThe work presents the development of a Hardware-in-the-Loop test method which enables the solving of integrated energy design problems at a system and concept level for the heat and cold supply of NZEBs based on electrically and thermally driven heat pumps and chillers. The main result is the realization of a test rig consisting of hardware (e.g. thermally driven chiller, or heat pump etc.), of software (e.g. LabView, TRNSYS) and the interface for the interaction of hardware and software.
252 632 - PublicationIDES-EDU-new educational program for sustainable buildings(Czech Technical University in Prague, 2013)
;Dvořáková, Pavla ;Kabele, Karel ;Brunsgaard, Camilla ;Wyckmans, Annemie; ;Magyar, Zoltan ;Almeida, Manuela ;Laskari, Marina ;Bartkiewicz, PiotrOp 't Veld, Peter87 1 - PublicationEndbericht zum Forschungsbericht „Bioenergie-Kraft-Wärme-Kälte-Kopplung-Versorgung“ im Rahmen der Programm¬linie „Energiesysteme der Zukunft“(Fachhochschulstudiengänge Burgenland Gesellschaft m.b.H., 2009)
; ; Pinter, Christian119 1 - Publication
119 1 - PublicationOptimization of thermal environment in a building with low-exergy radiant systems and glazed facadeThe aim of this study is to evaluate the potential of thermal comfort enhancement in a selected zone of a modern office building with high ratio of glazed façade and a heating / cooling system with high thermal inertia, equipped with low-exergy radiant heating and cooling. Experimental measurements performed over three reference weeks, distributed over heating, transition and cooling period, revealed overheating during 15 % - 30 % of the evaluated time intervals in the heating period. A simulation model of the reference zone with four variations of ventilation and shading system control strategies was created in TRNSYS to investigate the possibilities of thermal environment optimization. Three different heating/ cooling radiant systems were implemented to the model with the optimal set-point variation. The simulations indicate a potential to significantly enhance thermal comfort by improving the control strategy of the heating system and of the external blinds, however, the difference between the thermal environments created by the three different radiation systems were negligible.
90 1 - Publication
184 2 - Publication
98 1 - PublicationUsing heat for cooling in biomass based energy systems: technological challenges and solutions(2009-09-30)
;Pinter, Christian; 115 1 - PublicationSimulation of a Magnetocaloric Heat Pump in Building TechnologyIncreased quality of building envelopes in the last decades leads to decreased heating demands of new buildings and therefore heating devices with lower heating powers are needed. !ere is a lack of suitable solutions in the heating market in the small power range, which can cover small heating loads decentral without distribution losses. In the presented study, the potential of magnetocaloric heating is investigated. Apart from the advantage that no climate-relevant gases are used compared to commonly used compression heat pumps, this technology is suitable for covering low heating requirements. A cornerstone of the investigation is the development of a programme for simulating the behaviour of a building-integrated magnetocaloric heat pump. Target is to determine the effect of the change in basic properties such as the nature of the magnetocaloric material, the magnetic flux density, the working frequency, etc., but also to determine the influence of building parameters on the overall efficiency of the heating system.
126 695
- «
- 1 (current)
- 2
- 3
- »